Vip-Vision NVR8PRO Manual de usuario descargar pdf (Pagina 18)

Using the NVR to manually set the IP Address of an IP Camera (optional)

1. Right click to open the menu and select MAIN MENU, then select REMOTE DEVICE

2. Click IP SEARCH to begin scanning for all the attached IP Cameras.

3. The NVR will find your new IP cameras (normally with a default IP Address of 192.168.0.108). You

can then click on the IP Cameras Edit button to change its IP Address.

4. Change the IP Cameras IP Address, Subnet mask, and Gateway to the new IP address range.

Then click Ok to save. The camera IP Address must be in the same range as your NVR. In this

example we have used 192.168.0.101

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Sin comentarios

Vip-Vision NVR8PRO Manual de usuario Pagina 18